Easily check the water flow in the piping at a glance. For the piping around the molding machine! "Flow Monitor"

Only the lens part can be replaced! Continuing to use the main unit contributes to cost reduction. *Video of lens replacement available.

The "FMC-30-3F/FMC-30-4F" is a lens exchange type flow monitor. It allows for visual confirmation of fluid flow through the rotation of two colored blades at low flow rates (2L/min), and the monitoring lens (common for 3/8 and 1/2 sizes) can be replaced while still piped. Additionally, we also offer a valve-equipped flow meter "FM-03-B" that achieves stable cooling water flow and reproducibility of specified flow rates. 【Features】 ■ Visual confirmation of fluid flow through the rotation of two colored blades at low flow rates (2L/min) ■ Replacement of the monitoring lens (common for 3/8 and 1/2 sizes) can be done while still piped ■ Prevents unintended detachment of resin parts with a stopper ■ The threaded part on the T2 side can rotate freely left and right, making installation and replacement of the main unit easy *For more details, please refer to the PDF document or feel free to contact us.

basic information

【Specifications (Partial)】 ■ Main body material: Brass ■ Maximum operating pressure: 1.0MPa {10kgf/cm²} ■ Pressure resistance: 1.5MPa {15kgf/cm²} ■ Flow rate range: 2～20L/min ■ Seal material (indication symbol): Fluoro rubber (FKM) ■ Operating temperature range: +10˚C to +80˚C *For more details, please refer to the PDF document or feel free to contact us.