Insulated Flexible Duct "Atokufureki"
Increased strength using fiberglass. Less prone to condensation and lightweight. New sizes φ325 and φ375 have been added, with a lineup from φ100 to φ400 in increments of φ25.
"Atokofureki" is a flexible duct manufactured by Atco Rubber Products in the United States, designed for long lengths with an untreated end, measuring approximately 7.6 meters. The use of three-directional glass fibers on the surface enhances its strength. Because it employs long-fiber glass, it can suppress dust during installation. The inner material consists of double-layered polyethylene terephthalate film, making it resistant to tearing, and its lightweight nature reduces the burden on the structure. 【Features】 ■ Available in sizes from φ100 to φ400 in increments of φ25 (other sizes φ450 and 500 are also available) ■ Obtained non-combustible material certification from the Ministry of Land, Infrastructure, Transport and Tourism (Certification Number: NM-4396-1) ■ Achieved formaldehyde emission grade F☆☆☆☆ *Uses plant-based adhesive for insulation material ■ Uses insulation material with a thermal resistance value (R-value) of 4.2 (calculated in U.S. customary units) ■ Utilizes flexible and strong steel wire in the inner material ■ Compressed and packaged in a polybag for easy transportation, minimizing waste on site Note: The above product may vary slightly in content depending on the branch or sales office, and may not be available at all locations. Please contact your local branch or sales office for details. *For more information, please refer to the materials. Feel free to contact us with any inquiries.
basic information
【Specifications】 Nominal diameter φmm: 100/125/150/175/200/225/250/275/300/325/350/375/400/450/500 Length: 7.6m Maximum positive pressure: 1500Pa / 1000Pa Maximum negative pressure: 250Pa / 190Pa Maximum wind speed: 25m/s Operating temperature range ・-28℃ to 60℃ (at maximum positive pressure) (for continuous use) ・-28℃ to 80℃ (at positive pressure of 500Pa) (for continuous use) ・-28℃ to 120℃ (at positive pressure of 120Pa) (for intermittent use) End treatment: Untreated Note) The above products may vary slightly in content depending on the branch or sales office, and may not be available at all. For details, please contact each branch or sales office for confirmation. *For more information, please refer to the materials. Feel free to contact us with any inquiries.
Price range
Delivery Time
Applications/Examples of results
【Usage】 ■ For long lengths Note) The above products may vary slightly in content depending on the branch or sales office, and there may be cases where they are not handled, so please contact each branch or sales office for details. *For more information, please refer to the PDF document or feel free to contact us.
