All products and services
1～30 item / All 99 items
-
Slab Reset Concrete for Repairing Cross-Sections on the Floor Panel
Reinforced with special fibers! Provides sufficient resistance against cracking, peeling, and flaking.
last updated
-
Slab Reset Mortar for Repairing Surface Defects on Floor Panels
Early hardening allows for early release in emergency repair work! The material exhibits good compressive strength of over 24 N/mm² at an age of 4 hours.
last updated
-
Semi-flexible pavement premix injection material "Hoso Ace Eco Fast-Setting Type"
Traffic can be opened within a day! The curing time until traffic opening is approximately 24 hours.
last updated
-
Semi-flexible pavement premix injection material "Hoso Ace eco standard type"
CO2 emissions during manufacturing have been reduced by approximately 40% compared to conventional methods! This is a low-carbon type of injection material.
last updated
-
Moisture-retaining pavement premix injection material "Hoso Ace Moisture-retaining Type 80"
Exhibiting a high water absorption rate of about 80%! This product has a significant effect on suppressing surface temperature and is also excellent in durability.
last updated
-
Water-retaining pavement premixed injection material "Hoso Ace Water-retaining Type 60"
Ideal as a 100% permeable water-retaining pavement injection material! It is expected to have lasting effects in suppressing road surface temperature rise.
last updated
-
Water-retaining pavement premixed injection material "Hoso Ace Water-retaining Type 40"
In addition to strength, a maximum water absorption rate of about 40%! A compressive strength of approximately 4 N/mm² can be achieved with a curing time of 3 hours.
last updated
-
Semi-flexible pavement premix injection material "Hoso Ace Ultra Fast Hardening Type"
Achieve high strength! A bending strength of over 2.0 MPa can be obtained in 3 hours of curing time, and over 4.0 MPa in 3 days.
last updated
-
Semi-flexible pavement premix injection material "Hoso Ace Ultra Fast Hardening Type"
Early traffic opening is possible! A compressive strength of over 5 MPa can be achieved with a curing time of 3 hours.
last updated
-
Semi-flexible pavement premix injection material "Hoso Ace Fast Setting Type"
You can choose the type according to the transportation opening! We introduce the quick-strength type that allows for transportation opening in just one day.
last updated
-
Semi-flexible pavement premix injection material "Hoso Ace Standard Type"
Carefully selected raw materials are pre-mixed! On-site, you can obtain a uniform cement milk simply by mixing it with water.
last updated
-
High-strength quick-setting non-shrink grout material 'RWG-N'
Strength of 10N/mm² or more is achieved 2 hours after injection! A grout material with rapid strength development.
last updated
-
High-speed hard grout material 'LU-3'
High-speed hard type allows for early release! Ideal backfill material for emergency construction and similar applications.
last updated
-
Ultra-fast curing filler for PCa pavement joints "MG-5"
There is almost no change in liquidity over time for up to 20 minutes after mixing! It is a product with minimal bleeding as well.
last updated
-
High-speed hard grout material 'MG-1'
Ideal for emergency construction with high-speed rigidity! Usable time is approximately 10 to 15 minutes.
last updated
-
High-strength, viscous non-shrink grout material 'MG-15M Hyper'
Ideal for pressure injection work with moderate viscosity! Grout material that can also be used for pump delivery and insertion.
last updated
-
High-strength, high-flow non-shrink grout material 'MG-15M Super'
High intensity and high fluidity! Exhibits excellent fluidity and can sufficiently fill fine gaps.
last updated
-
General grout construction fiber-reinforced non-shrink grout material 'MG-15MF'
After hardening, there is no gap between the grout material and the structure, ensuring integrity.
last updated
-
High-speed hard grout material for manhole cover height adjustment 'MG-11M'
To demonstrate excellent fluidity, it is sufficiently filled even in fine gaps!
last updated
-
Emergency construction filling ultra-fast hardening grout material 'MG-10MS'
The material properties are stable over the long term and are excellent in durability and weather resistance!
last updated
-
U-Grout AG
It has high underwater non-separation performance and good fluidity, making it excellent for construction and filling!
last updated
-
U-Grout CT
High chloride ion penetration suppression effect, making it applicable to areas where salt damage is a concern!
last updated
-
U-Grout L
Reduces temperature rise due to water and heat generation by approximately 20℃! Excellent crack resistance due to high tensile strength.
last updated
-
U-Grout M
Due to its high flowability, fluidity can be ensured even during summer construction!
last updated
-
U-Grout RII
No material separation or bleeding, and no shrinkage during drying!
last updated
-
For U-grout pad
It is a filler material that contains calcium oxide-based expansion agents and has minimal volume reduction during drying!
last updated
-
U-Grout General Use
The construction using the slurry supply system enables high-speed and large-volume pouring!
last updated
-
Cement-based non-shrink grout material "U-Grout" slurry supply system
This is a new environmentally friendly system that does not generate dust or industrial waste (empty bags)!
last updated
-
MU Regist Method
It is possible to reduce costs by minimizing material usage and construction process losses, leading to a shorter construction period!
last updated
-
U-LSH1 SFII
Applying the standard amount of coating to the concrete surface in one layer will quickly demonstrate surface water repellency!
last updated