• 

  Vibration-free water circulation drill for exterior wall construction, hole man AT5, 3.7 to 10.5 mm diameter.(5)

  The "Hole Man AT-5" is a lightweight and compactly designed water circulation type vibration-free drill. It operates with low noise and dust, making it possible to conduct construction work even in office buildings and hospitals without disturbing the environment. Since it uses a circulation system, there is no need for scaffolding to draw water or dispose of sludge. Typically, drilling work with a vibration-free drill produces about 50 liters of sludge in a day, but the Hole Man AT-5 can reduce this to around 1 kg, making it an environmentally friendly machine tool. Additionally, since the coolant is only tap water, running costs are kept low. 【Features】 - High-performance exhaust blower allows for continuous operation in summer. - Equipped with an error mode that can handle voltage drops and overloads. - Shorter length for a more compact, lightweight design that is less likely to tip over on scaffolding. - Compact storage with a dedicated case. - High-power motor with improved quietness. - Stepless speed control for adjusting rotation speed. - Customizable with a safety and stability-focused side handle or a compact straight grip for mobility. - Made with metallic powder-containing resin for an upscale feel! - No need to purchase parts like grip pipes based on drilling depth or diameter. - Compatible with the Water Smashing AT series.

• 

  Drill for hole-making work on asbestos exterior walls 3.7~24φ Hole Man AT5(1)

  It can also be used for direct drilling or core sampling of asbestos-containing exterior walls to collect asbestos analysis samples! Waste is solidified into concrete and classified as asbestos-containing industrial waste. Since it is a wet drill, it has low asbestos dispersal. For more details, please refer to our company's website for the "Research Report on the Removal of Asbestos-Containing Architectural Finishing Materials Using Water Circulation Type Vibration-Free Drills - Revised Edition." It is low noise and dust-free, allowing construction to be carried out even in office buildings and hospitals while occupied. Being a circulation type, there is no need for scaffolding to draw water or dispose of sludge. 【Features】 ■ High-performance exhaust blower enables continuous operation in summer ■ Equipped with an error mode that can handle voltage drops and overloads ■ Shorter length for a more compact, lightweight design that is less likely to tip over on scaffolding ■ Compact storage in a dedicated case ■ High-power motor with improved quietness ■ Stepless speed control for adjustable rotation speed ■ Customizable with a safe and stable side handle or a compact straight grip focused on mobility ■ Uses resin containing metallic powder for an upscale feel! ■ No need to purchase parts like grip pipes based on drilling depth or diameter ■ Compatible with the Water Smashing AT series.

• 

  Blaze Bit 19φ for removing elastic coatings containing asbestos.(2)

  Remove the asbestos layer of about 2 to 5 mm using a 19 mm blaze bit, and drilling can be done with a dry vibration drill. This method is easy to implement even for workers who are accustomed to vibration drills, especially when asbestos is only present on the surface. The work consists of two processes: removal and drilling, but since the asbestos-containing waste is only from the wall surface, the amount of asbestos waste can be reduced compared to direct drilling. The waste will be solidified in concrete and classified as asbestos-containing industrial waste. For more details, please refer to our company's website for the "Research Report on the Removal of Asbestos-Containing Architectural Finishing Materials Using Water-Circulation Non-Vibrating Drills - Revised Edition." This is a lightweight and compact design water-circulation non-vibrating drill. It operates with low noise and dust, allowing construction to be carried out in places like office buildings and hospitals without disruption. Since it is a circulation type, there is no need for scaffolding for water collection or sludge disposal. It can reduce sludge waste to about 1/50, and since the coolant is tap water, running costs are also kept low. It is also compatible with the Water Smashing AT series.

• 

  Vibration-free water circulation drill for temporary scaffolding, 12.7 to 24 mm, Hole Man AT5(5)

  Core drilling can be performed with hole diameters of 12.7/14.5/16.5/18.0/24.0 (φ). The "Hole Man AT-5" is a lightweight and compact water-circulating vibration-free drill. It operates with low noise and dust, making it possible to work in places like office buildings and hospitals without disturbing the environment. Since it is a circulating system, there is no need for scaffolding to draw water or dispose of sludge. Sludge waste can be reduced to about 1/50, and since the coolant is tap water, running costs are kept low. 【Features】 - High-performance exhaust blower allows for continuous operation in summer. - Equipped with an error mode that can handle voltage drops and overloads. - Shorter length for a more compact, lightweight design that is less likely to tip over on scaffolding. - Compact storage with a dedicated case. - High-power motor with improved quietness. - Stepless speed control for adjusting rotation speed. - Customizable with a safe and stable side handle or a compact straight grip focused on mobility. - Uses resin containing metallic powder for an upscale feel! - No need to purchase additional parts like grip pipes based on drilling depth or diameter. - Compatible with the Water Smashi AT series.

• 

  Portable Power Supply for Construction Sites ATB-1500(1)

  It can be used at construction sites in a dedicated hard case with dustproof and waterproof features. In the event of a fall or impact that causes a fire, it detects the fire and activates the automatic extinguishing function. *This does not guarantee complete extinguishment. The non-vibrating drill Hole Man AT-5 can be used for 440 holes (approximately 1.5 days), and a 1000W grinder can be used continuously for about 1.3 hours. The dustproof and waterproof features are equivalent to IP53 (according to in-house testing). Dustproof rating (5) means that harmful amounts of dust do not enter the interior (not completely sealed, but does not interfere with the normal operation of the equipment). Waterproof rating (3) means it is protected against water falling within a range of 60 degrees from vertical (can withstand splashes of water from above at an angle). 【High output 1200W, large capacity 1531Wh】The pure sine wave AC output is 1200W (peak 2400W). 【Long lifespan, ultra-safe battery】Uses highly safe lithium iron phosphate lithium-ion, with approximately 6 times the battery life of a typical portable power source (over 500 cycles), allowing for about 3000 charge and discharge cycles! 【Size】33cm (width), 24.5cm (height), 24.4cm (depth), 12.6kg (weight).

• 

  Scaffold connection mark repair "Wall connection neck roll pin"(2)

  Since there is no need to remove tiles during construction, smooth demolition work is possible. Furthermore, there is no concern about efflorescence, allowing for construction regardless of the season or weather. During temporary setup, a non-vibrating drill "Hole Man AT-5" can create clean holes of 18φ or 16.5φ in the tiles, enabling the use of existing tiles, thus saving both time and costs associated with re-firing new tiles. ■ Scaffolding can now be installed on stone walls and stone-patterned tiles that previously could not accommodate it. ■ Wall anchors can be reused during the next renovation, leading to cost savings for future renovations. ■ With decorative caps, the wall-connecting anchors can remain inside the wall while maintaining aesthetic appeal. ■ Water is prevented from entering the holes by water-stop bolts, which prevents rust from forming on the anchors inside the wall.

• 

  Neck roll pins for small diameter paths 6.5φ・9.0φ(3)

  This product is a "finishing cap" designed to beautifully finish the hole marks created during exterior wall repairs. When drilling into an exterior wall, it is difficult for the worker to drill perfectly vertical holes, even with the utmost care, resulting in slight angular deviations. The "Neck Roll Pin" is a product developed to address this issue, featuring a dual structure with a brass head and a resin body. The head is designed to tilt up to approximately 15 degrees relative to the body, allowing for automatic adjustment to ensure that the head aligns flush with the wall surface, even when installed in a non-vertical hole. Additionally, it can be painted to match the tiles or finishing materials of the exterior wall. The painting options are primarily as follows: - Single color (base color only) - Two-color use (base color with a speckled pattern) The paint used is acrylic silicone resin paint manufactured by Natco. After undergoing zinc phosphate treatment, it is baked on at the factory. If there is a tight deadline, it is also possible to provide it unpainted. Furthermore, we can accommodate special painting options such as three-color use (mottled patterns), so please feel free to consult with us.

• 

  Beginner-friendly Easy Mirror Finish Roller Sander Buffing ATR-65BF(0)

  You can achieve professional mirror finishing on your own! Do you think that achieving a mirror finish on stainless steel is difficult and challenging? ★ Powerful scratch removal, speedy polishing ★ Reduced processing time, astonishing shine ★ Smooth finish with minimal distortion using roller grinding stones ★ Easy work without wobbling through linear processing This is a mirror polishing tool that smoothly polishes large scratches and welds on stainless steel and non-ferrous metal surfaces.

• 

  Roller Thunder(0)

  The surface of the steel frame is covered with an oxide film, commonly known as "black skin," which forms during the manufacturing process by blast furnace and electric furnace manufacturers. This black skin has a very high adhesion, is smooth to the touch, and is extremely difficult to remove, making it a "stubborn" problem. The solution to this issue is a dedicated 50mm wide TRB grinding wheel. - It features a wide design that can accommodate large areas and a unique grinding wheel structure that effectively "grips" the smooth black skin, allowing it to be peeled off thinly and widely. *Note that it is optimized for a peeling action rather than grinding, making it unsuitable for rough work like removing buildup. - It removes the adhered black skin efficiently with a grip feel similar to that of studless tires. - The core part of the wheel is made of a cushioning rubber material, which reduces noise during operation. It also minimizes vibrations, significantly reducing the burden on the operator. Although the price of the grinding wheel itself is somewhat high, I am confident that its overwhelming work speed and the beauty of the finish will contribute to cost reduction in total costs, including labor expenses.

Product/Service List (9)