EPJ Official site

High-density polyethylene pedestrian passage (pedestrian opening) "EP-Sleeve" - Lightweight, high strength, and a proposal for labor-saving! [Coming soon]

<Specifications> (This product is based on nominal inner diameter) - EP-600 Inner diameter: 600 / Outer diameter: 700 (mm) Reference weight: approximately 17kg/m * EP-700 Inner diameter: 700 / Outer diameter: 816 (mm) Reference weight: approximately 23kg/m * EP-800 Inner diameter: 800 / Outer diameter: 938 (mm) Reference weight: approximately 29kg/m <Manufacturing length: Minimum 300mm to maximum / Please inquire> Note 1) The allowable tolerance for the inner diameter of the pipe is ±1.5%. Note 2) The cutting tolerance for the pipe is manufacturing length -5mm to 0mm. Note 3) * Sizes are not always in stock. Please confirm the manufacturing lead time in advance. 【Handling of Polyethylene Sleeve Pipes】 <During Use (During Installation)> - Please refrain from using the product in locations with excessive vibrations that may affect it. - Do not apply strong forces that may cause deformation to the product. - During concrete pouring, if the vibrator comes into direct contact with the product, it may cause damage, so please be very careful. ■ Please consider the reinforcement of the internal space of the sleeve pipe based on the concrete pouring speed, pouring height, mouth diameter, and beam width at each construction site before use. ■

[Recently Released] Lightweight Polyethylene Personnel Opening "EP-Sleeve" Proposal for Labor Saving at Construction Sites!

<Specifications> (This product is designated by inner diameter) - EP-600 Inner diameter: 600 / Outer diameter: 700 (mm) Reference weight: approximately 17kg/m *EP-700 Inner diameter: 700 / Outer diameter: 816 (mm) Reference weight: approximately 23kg/m *EP-800 Inner diameter: 800 / Outer diameter: 938 (mm) Reference weight: approximately 29kg/m <Manufacturing length: Minimum 300mm to Maximum / Please inquire> Note 1) The allowable tolerance for the inner diameter of the pipe is ±1.5%. Note 2) The cutting tolerance for the pipe is manufacturing length -5mm to 0mm. Note 3) *Sizes are not part of the regular stock. Please confirm the manufacturing lead time in advance. 【Handling of Polyethylene Sleeve Pipes】 <During Use (During Installation)> - Please refrain from using the product in locations with excessive vibrations that may affect it. - Do not apply strong forces that may cause deformation to the product. - When pouring concrete, if the vibrator comes into direct contact, it may cause damage, so please be very careful. ■Please ensure sufficient consideration for the reinforcement of the sleeve pipe's internal space based on the concrete pouring speed, pouring height, mouth diameter, and beam width at each construction site before use.■

Lightweight polyethylene personnel access EP sleeves support shortening construction timelines!

**Features** - High pressure resistance: Strong against impact and external pressure, excellent flat strength - Lightweight material: Lighter than rigid PVC pipes, contributing to transportation and work efficiency - Rust-resistant: Made of high-density polyethylene, ideal for installation in wet areas - Cold and chemical resistant: Resistant to extreme cold and chemicals **Our Strengths** We provide products that contribute to solving challenges at construction sites. Please feel free to contact us. **Specifications** (This product is based on nominal inner diameter) - EP-600 Inner diameter: 600 / Outer diameter: 700 (mm) Reference weight: approximately 17kg/m *EP-700 Inner diameter: 700 / Outer diameter: 816 (mm) Reference weight: approximately 23kg/m *EP-800 Inner diameter: 800 / Outer diameter: 938 (mm) Reference weight: approximately 29kg/m [Manufacturing length: Minimum 300 to Maximum 1900 mm] Note 1) The allowable tolerance for the inner diameter of the pipe is ±1.5%. Note 2) The cutting tolerance for the pipe is manufacturing length -5mm to 0mm. Note 3) *Sizes are not part of regular stock. Please confirm the manufacturing lead time in advance. **Please consider the reinforcement of the sleeve pipe's internal space based on the concrete pouring speed, pouring height, mouth diameter, and beam width for each construction site before use.**

Improvement of work efficiency with non-corrosive materials and polyethylene through-holes "EP sleeve," promoting the longevity plan for public facilities, etc.

<Specifications> (This product refers to the nominal inner diameter) - EP-600 Inner diameter: 600 / Outer diameter: 700 (mm) Reference weight: approximately 17kg/m * EP-700 Inner diameter: 700 / Outer diameter: 816 (mm) Reference weight: approximately 23kg/m * EP-800 Inner diameter: 800 / Outer diameter: 938 (mm) Reference weight: approximately 29kg/m [Manufacturing length: Minimum 300 to Maximum 1900 mm] ■ Only for EP-600, we also accept manufacturing lengths over L=1900mm. Please consult us in advance ■ Note 1) The allowable tolerance for the inner diameter of the pipe is ±1.5%. Note 2) The cutting tolerance for the pipe is manufacturing length -5mm to 0mm. Note 3) * Sizes are not standard stock items. Please confirm the manufacturing lead time in advance. ▲ Please consider the reinforcement of the sleeve pipe's internal space sufficiently based on the concrete pouring speed, pouring height, mouth diameter, and beam width at each construction site ▲ 【Points to Note During Installation】 - Please refrain from using the product in locations with excessive vibrations that may affect it. - Do not apply strong forces that may cause deformation to the product. - During concrete pouring, if the vibrator directly contacts the product, it may cause damage, so please be very careful.