Sales have started at Royal Home Center! 'PERI NS Cypress' is a high-quality film-faced plywood jointly developed by PERI Japan Co., Ltd. and Nisshin Co., Ltd. It uses a special film that is specifically designed for softwood, unlike anything available before. - JAS certification (acquired) - PEFC certification (scheduled for registration) - Rigidity tests conducted by a public third-party organization Additionally, internal tests by the PERI Group have confirmed a reuse count of 20 times. (Please ensure to apply release agent and perform surface scraping and cleaning to extend the reuse count.) ■ Structure: Base board: Domestic Hinoki (5 layers) Film: One side gray resin coating Edge treatment: Water-soluble release agent + gray paint ■ Available at the following stores: - Royal Home Center Chiba North - Royal Home Center Narashino Please feel free to check it out in-store!! *For more details about this product, please do not hesitate to contact us. PERI Japan Co., Ltd.

PERI will begin selling a new plywood product, 'PERI NS Cypress,' which can be used during concrete pouring at construction sites, starting on June 2, 2025. 'PERI NS Cypress' is a high-quality film plywood jointly developed by PERI Japan Co., Ltd. and Nisshin Co., Ltd. It uses a special film that is specifically designed for softwood, which has never been used before. - JAS certification (obtained) - PEFC certification (scheduled for registration) - Rigidity testing by a public third-party organization Additionally, internal tests by the PERI Group have confirmed a reuse count of 20 times. (Please ensure that release agent application and surface scraping/cleaning are performed to extend the reuse count.) ■ Structure: Base board: Domestic Hinoki (5 layers) Film: One side gray resin coating Edge treatment: Water-repellent agent + gray paint ■ Price Please feel free to contact us for inquiries. *For more details about this product, please do not hesitate to contact us. PERI Japan Co., Ltd.

The "Quick Lowering Adapter UJA" is a dedicated accessory for PERI UP (shoring) and ST100 (shoring) that can be easily attached under the head spindle. After removing the safety hardware (locking plate) of the Quick Lowering Adapter, striking the designated area (step wedge) with a hammer will cause the top plate to drop, quickly releasing the load from the head spindle. **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

"PERI Birch Plywood" is a formwork plywood (made from Nordic hardwood) that has obtained the internationally recognized forest certification PEFC, known for its high credibility, boasting "overwhelming reuse frequency" and "high thermal rigidity performance." "PERI Birch Plywood" achieves high efficiency due to its consideration for the global environment and its high reuse frequency, resulting in reduced total costs. We are pleased to announce a special sales campaign during the following period. Campaign Period: April 14, 2025, to May 30, 2025 (for sales during this period) We have prepared special benefits according to the quantity purchased: - 1 package (50 sheets) - One truckload (250 sheets of 2 x 6 size, 200 sheets of 3 x 6 size) - Over 1000 sheets We encourage you to consider using this opportunity for your construction sites or securing a substantial inventory. **For more details, please check related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so feel free to contact us. PERI Japan Co., Ltd.

The PERI climbing systems 'SCS', 'RCS', 'ACS', and 'CB' are utilized at various construction sites. The climbing systems, which are one of PERI's product groups, are used at construction sites around the world. These systems integrate working scaffolding and formwork systems to achieve 'improved formwork work efficiency', 'significant reduction in workforce', 'ensured accuracy in formwork construction', 'reduction of scaffolding materials', and 'safety in the work area'. There are two types of climbing methods: one that uses cranes and another that uses a movable hydraulic device instead of a crane, allowing for the selection of the optimal method based on the construction content. **For more details, please check the related products. We also hold 'product assembly experiences' and 'system formwork study sessions' at our stockyard, so please feel free to contact us.** PERI Japan Co., Ltd.

The "TRIO" is a wall formwork system that can be used for various purposes at construction sites, achieving simplification of the formwork process and shortening of construction time! It can be used for residential buildings or multi-story structures, as well as for infrastructure projects, making it an economical system that enhances work efficiency. <<Features of TRIO Panel Formwork>> - Rapid work operation Panels with minimal width that can be used both horizontally and vertically. - Simple connections The BFD alignment coupler is used as the only component for connecting all panels. - Large area shutters Standard panels measuring up to 3.30m x 2.40m are used, providing a high level of surface uniformity (with tie rod positions at two locations). **For more details, please check related products. We also offer "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"Multi Prop" is a lightweight aluminum support material from PERI. It can be used in combination with frames as a table system or support tower, among other applications. It enables total cost reduction! **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

Perry Japan Co., Ltd. introduces CNC machines to manufacture custom formwork. Perry's skilled formwork manufacturing team produces plywood panels cut to specified sizes and special formwork tailored to the requirements of each project. This includes custom-made work platforms, box-outs, or 3D formwork units in any shape or size. They are shipped fully prepared, allowing for immediate assembly upon delivery to the construction site. *For more details, please feel free to contact us. Perry Japan Co., Ltd.

We are introducing reference cases where the aluminum slab formwork "GRIDFLEX" has been used on actual sites. **For more details, please check the related products. Additionally, we also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"GRIDFLEX" is a highly flexible slab formwork that is standardized, achieving improved labor productivity and high safety. With just two main components, it is possible to assemble the general part of the formwork. Furthermore, even if a change in assembly direction is required, there is no need to add additional materials. The panels are hooked from below and positioned by pushing them up with a shuttering aid. Once the assembly work from below is completed and the Gridflex panels are laid out, safe access is provided to carry out the formwork plywood installation work. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us.** Perry Japan Co., Ltd.

We are introducing reference cases where the large wall formwork system "VARIO GT24" has been used on site. **For more details, please check the related products. Additionally, we also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

The "VARIO GT24" is a truss beam formwork system that uses PERI's adjustable slot and connector fittings. "VARIO means... versatility." By using it, it is possible to accurately assemble various dimension panels tailored to each project. It is also utilized in sites that require large formwork, such as bridge pier construction, retaining wall construction, and LNG containment dikes. Additionally, it is capable of constructing curved walls and polygonal shapes, truly living up to the name "VARIO: versatility." **For more details, please check related products. We also hold 'product assembly experiences' and 'system formwork study sessions' at our stockyard, so please feel free to contact us.** PERI Japan Co., Ltd.

"DUO" is a lightweight resin formwork system from PERI. It is made from a newly developed material called Polytech resin, which is high-strength and lightweight. The number of components is minimal, making it easy to handle. The assembly method is straightforward, designed so that no tools are needed, allowing for efficient work even for those with little experience in formwork. Most components share common specifications. 【DUO Product Features】 ■ A new system formwork made of resin ■ High strength and lightweight ■ Minimal components for easy handling ■ 100% recyclable <NETIS Registration Number: KT-230004-A> https://www.netis.mlit.go.jp/netis/ **For more details, please check related products. We also offer 'Product Assembly Experiences' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

The lightweight aluminum beam "AB 20C" from PERI allows for nailing by inserting strip material (plastic/plywood) into the top edge. This beam material is designed and manufactured to maximize the properties of aluminum. It is weather-resistant, unaffected by pests, highly durable, lightweight, and easy to recycle efficiently. The strip material can be easily replaced for nailing. **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

The "PERI GT 24 (formwork beam material)" has resolved the issue of material stability, which was the only drawback of wood, by constructing trusses using laminated timber. It maintains high precision without deformation over long periods and retains the advantages of wood, such as the ability to be nailed. Additionally, the use of the "ST system" improves workability by eliminating issues like warping found in steel beams at the beam support sections. It is lightweight and easy to handle. Being made of wood, it allows for the installation of screws and nails on-site. Features of the "PERI GT24 Girder (formwork beam material)": - Maintains high precision over long periods - Lightweight at 5.9 kg/m, making it easy to handle - Formed from strong chord materials - Can be installed with screws and nails due to its wooden composition - High bending strength enables work over large spans - Main materials are fixed with double tail joints at the connection points of each truss beam **For more details, please check related products. We also offer "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so feel free to contact us.** PERI Japan Co., Ltd.

PERI is selling a new plywood called "PERI Formply" that can be used for concrete pouring at construction sites. "PERI Formply" is a high-quality film-faced plywood that has been developed by PERI for the Australian market and modified to suit the Japanese market, achieving a balance between reusability and price. **For more details, please check the related products. We also hold "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

"PERI Birch" is a formwork plywood (made from Nordic hardwood) that has obtained the internationally recognized forest certification PEFC, known for its high credibility. It boasts "overwhelming reuse frequency" and "high thermal rigidity performance." "PERI Birch" achieves high efficiency due to its multiple reuse capabilities while considering the global environment, leading to a reduction in total costs. We encourage you to consider using it at construction sites and securing a substantial inventory. **For more details, please check the related products. Additionally, we offer "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so feel free to contact us. PERI Japan Co., Ltd.

"PERI UP/Rosette" is an easy-lock (wedge-type) support system. Assembly is simple and safe, and it also improves work efficiency on site. It can be used for various applications, including work stages, table forms, stair towers, and more. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so feel free to contact us. PERI Japan Co., Ltd.

The "VARIO GT24" is a truss beam wall formwork system that uses adjustable slot fittings. By using it, it is possible to accurately assemble dimension panels tailored to each project. "VARIO means flexibility." **For more details, please check the related products. We also hold 'product assembly experiences' and 'system formwork study sessions' at our stockyard, so please feel free to contact us.** Perry Japan Co., Ltd.

The "PERI GT 24 (formwork beam material)" has resolved the issue of material stability, which was the only drawback of wood, by constructing trusses using laminated timber. It maintains high precision without deformation over long periods and retains the advantages of wood, such as the ability to be nailed. Additionally, the use of the "ST system" improves workability by eliminating issues like warping found in steel beams at the beam support sections. Features of the PERI GT24 Girder (formwork beam material): ■ Maintains high precision over long periods ■ Lightweight at 5.9 kg/m, making it easy to handle ■ Formed from strong chord materials ■ Can be constructed by driving screws and nails since it is made of wood ■ High bending strength allows for work over large spans ■ Main materials are fixed with double tail joints at the connections of each truss beam **For more details, please check related products. We also hold "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

The "PERI GT 24 (formwork beam material)" has resolved the issue of material stability, which was the only drawback of wood, by constructing trusses using laminated timber. It maintains high precision without deformation over long periods and retains the advantages of wood, including the ability to be nailed. Additionally, the absence of warping, like that found in steel beams, improves the workability when using "PERI GT 24 (formwork beam material)" in the beam support areas. **For more details, please check related products. We also hold "product assembly experiences" and "system formwork study sessions" at our stockyard, so please feel free to contact us.** PERI Japan Co., Ltd.

PERI is launching a new plywood called "PERI Formply" that can be used for concrete pouring at construction sites, starting from November 2023. "PERI Formply" is a high-quality film-faced plywood developed for concrete formwork in the Australian market, modified to suit the Japanese market, achieving a balance between reusability and price. **For more details, please check the related products. We also offer "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

The "VARIO GT24" is a truss beam wall formwork system that uses adjustable slot fittings. By using it, it is possible to accurately assemble dimension panels tailored to each project. "VARIO means... versatility." **For more details, please check related products. We also hold 'product assembly experiences' and 'system formwork study sessions' at our stockyard, so please feel free to contact us.** Perry Japan Co., Ltd.

We are introducing reference cases where the lightweight resin formwork system "DUO" has been used on actual sites. **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"DUO" is a lightweight formwork system from PERI. It is made from a newly developed material called Politec, which is high-strength and lightweight. It has fewer components, making it easy to handle. The assembly method is straightforward, designed to require no tools, and allows for efficient work even for those with little experience in formwork. Most components share common specifications. 【DUO Product Features】 ■ A new system formwork made of resin ■ High strength and lightweight ■ Fewer components, easy to handle ■ 100% recyclable <NETIS Registration Number: KT-230004-A> https://www.netis.mlit.go.jp/netis/ **For more details, please check related products. We also offer "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

We are introducing reference cases where the aluminum slab formwork "GRIDFLEX" has been used on site. **For more details, please check the related products. Additionally, we also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"GRIDFLEX" is a standardized, highly flexible slab formwork that achieves improved labor productivity and high safety. With just two main components, it is possible to assemble the general part of the formwork. Furthermore, even if a change in assembly direction is required, there is no need to add additional materials. The panels are hooked from below and positioned by pushing them up with a shuttering aid. Once the assembly work from below is completed and the GRIDFLEX panels are laid out, safe access is provided to carry out the installation of the formwork plywood. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us.** Perry Japan Co., Ltd.

"TRIO" is a wall formwork system that can be used for various purposes at construction sites, enabling the simplification of formwork procedures and the reduction of construction time. It can be used for a wide range of applications, from residential and multi-story building construction to infrastructure projects, making it an economical system that enhances work efficiency. **For more details, please check the related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"PERI UP/Rosette" is an easy-lock (wedge-type) support system. Assembly is simple and safe, and it also improves work efficiency on site. It can be used for various applications, including work stages, table forms, stair towers, and more. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

Achieve safe and efficient work with PERI's system formwork! For concrete system formwork, the walls are 'DUO' (NETIS registered)! The slabs are 'GRIDFLEX'! **For more details, please check the related products. We also hold 'product assembly experiences' and 'study sessions on system formwork' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.