Bauma is the world's largest international trade fair for construction machinery, mining machinery, construction materials manufacturing machinery, construction vehicles, and related specialties, held every three years. Since its inaugural event in 1954, visitors from many countries have attended. PERI has a long tradition of exhibiting at bauma. In 1971, PERI participated in bauma for the first time, just two years after its founding. Since then, we have showcased our innovative products through this international exhibition. The next bauma 2025 is scheduled as follows: Dates and Times April 7-13, 2025 Monday to Friday: 9:30 am – 6:30 pm Saturday: 8:30 am – 6:30 pm Sunday: 9:30 am – 4:30 pm Venue Messe München, Munich, Germany *Products available in Japan can be viewed at the Ibaraki stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

bauma is the world's largest international trade fair for construction machinery, mining machinery, construction materials manufacturing machinery, construction vehicles, and related specialized industries, held every three years. In 2022, PERI showcased and introduced our products (construction formwork and shoring products, sensor products, construction 3D printers, etc.) in an exhibition space of approximately 4,000 square meters. We welcomed over 200,000 visitors during the seven-day event. We have added the previous bauma 2022 event to our company website (achievements). You can view photos of our exhibition booth and products from 2022. The next bauma 2025 is scheduled to be held as follows: Dates and Times April 7-13, 2025 Monday to Friday: 9:30 am – 6:30 pm Saturday: 8:30 am – 6:30 pm Sunday: 9:30 am – 4:30 pm Venue Messe München, Munich, Germany *Products available in Japan can be viewed at our Ibaraki stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

PERI products are used on construction sites around the world. This time, we would like to introduce the construction site 'Lighthouse 2.0' in Aarhus, Denmark. Lighthouse 2.0 is a mixed-use project that includes the high-rise building "Arhus Φ," which is 44 stories tall (142m) and constructed in Aarhus, Denmark. "Arhus Φ" has become the tallest residential building constructed in Denmark. It is located within a 2 km radius of the Aarhus Cathedral in the city center, boasting an excellent location overlooking Aarhus Bay. It was also selected as the best building in the category of Best Tall Building 100–199 Meters at the 2023 CTBUH Awards. PERI products were used in the construction of this building. PERI products: 1. ACS Climbing System 2. PERI UP 3. RCS-P (RCS External Climbing), among others *For more details, please refer to the PDF document or feel free to contact us.

PERI products are used at construction sites around the world. This time, we would like to introduce the construction site of the "Saale Valley Bridge" in Naumburg, Germany. The Saale Valley Bridge spans the Saale River, which flows along the border between Saxony-Anhalt and Thuringia. With a length of 1.2 km, a width of 12.50 m, and 16 piers reaching a height of 60 m, it elegantly blends into the surrounding landscape, which has been designated as a nature reserve, despite being a large structure. PERI products were used in the construction of this bridge. PERI products: 1. SCS Climbing System 2. PERI UP 3. VARIO GT24 Wall Formwork *For more details, please refer to the PDF document or feel free to contact us.

On September 4th (Wednesday), in Tokyo! We will be exhibiting at METF 2024 (Military Engineer Tech Fair)! METF 2024 (Military Engineer Tech Fair) is an exhibition showcasing new technologies related to defense facilities. The latest technologies that can be applied to defense facilities will be displayed and presented. PERI Japan will showcase the 'DUO Formwork System.' A presentation is scheduled for the 4th session (15:40–15:50). 'PERI DUO' <NETIS Registration Number: KT-230004-A> https://www.netis.mlit.go.jp/netis/ Please be sure to stop by our exhibition booth. Thank you very much. PERI Japan Co., Ltd.

September 5th (Thursday) to 6th (Friday), held in Kobe! We will be exhibiting at the International Frontier Industry Messe 2024! The International Frontier Industry Messe 2024 is one of the largest comprehensive industrial exhibitions in western Japan. In 2024, more than 500 companies and organizations, mainly from the Kansai area, are expected to exhibit, with over 15,000 visitors anticipated. PERI Japan will once again participate as a member of the German companies in Japan, exhibiting at the "Kobe City German Pavilion." We will showcase our digital solution "PERI ISC," which optimizes the concrete pouring process at construction sites, contributing to time savings and cost reductions. "PERI ISC" <NETIS Registration Number: CB-230029-A> We invite you to visit the German Pavilion and our exhibition booth. Thank you very much. PERI Japan Co., Ltd.

PERI products are used in shipyards and plants around the world. This time, we would like to introduce a case where "PERI UP (working scaffold)" was used for maintenance of a steamship in Zurich, Switzerland. The "Stadt Zürich" offers a tranquil experience to about 1.2 million tourists each year against the picturesque backdrop of the Swiss Alps. Regular maintenance is essential for the fleet of 17 ships to ensure they operate reliably over 360,000 kilometers on Lake Zurich each year. Due to the unique shape of the ship, PERI has planned the optimal layout and quantity of temporary scaffolding. PERI UP (working scaffold) maximizes spans while flexibly accommodating complex shapes. It is easy to assemble and safe. By optimizing the quantity of temporary materials used, it helps reduce workload and costs, contributing to CO2 reduction as well. It can be used for various applications, including working stages, stair towers, table forms, and more. PERI products: 1. PERI UP (working scaffold) *For more details, please refer to the PDF materials or feel free to contact us.*

Thank you for your continued support. We would like to inform you about our summer holiday schedule as follows: <Summer Holiday Period> From Saturday, August 10, 2024, to Wednesday, August 14, 2024. Inquiries during the holiday period will be addressed sequentially starting from Thursday, August 15, 2024. Perry Japan Co., Ltd.

"PERI UP/Rosette" is an easy-lock (wedge-type) support system. Assembly is simple and safe, and it also improves work efficiency on site. It can be used for various applications, including work stages, table forms, stair towers, and more. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so feel free to contact us. PERI Japan Co., Ltd.

The "VARIO GT24" is a truss beam wall formwork system that uses adjustable slot fittings. By using it, it is possible to accurately assemble dimension panels tailored to each project. "VARIO means flexibility." **For more details, please check the related products. We also hold 'product assembly experiences' and 'system formwork study sessions' at our stockyard, so please feel free to contact us.** Perry Japan Co., Ltd.

The "PERI GT 24 (formwork beam material)" has resolved the issue of material stability, which was the only drawback of wood, by constructing trusses using laminated timber. It maintains high precision without deformation over long periods and retains the advantages of wood, such as the ability to be nailed. Additionally, the use of the "ST system" improves workability by eliminating issues like warping found in steel beams at the beam support sections. Features of the PERI GT24 Girder (formwork beam material): ■ Maintains high precision over long periods ■ Lightweight at 5.9 kg/m, making it easy to handle ■ Formed from strong chord materials ■ Can be constructed by driving screws and nails since it is made of wood ■ High bending strength allows for work over large spans ■ Main materials are fixed with double tail joints at the connections of each truss beam **For more details, please check related products. We also hold "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

At Perry Japan, we have a stockyard and a product exhibition hall. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. Please be sure to check out "【Product Exhibition Hall Tour & System Formwork Study Session】Perry Japan" from the related links. Perry Japan Co., Ltd.

The PERI Group publishes the "PERI BOOK," which summarizes company information, products and services, and achievements at overseas locations. Please take a look at the latest information from the PERI Group. **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

PERI products are used at construction sites around the world. This time, we will introduce the construction site of the "Tamsui Bridge" in Tamsui District, Taipei, Taiwan. The Tamsui Bridge is a bridge currently under construction over the Tamsui River, which separates the Tamsui District and Bali District of New Taipei City, Taiwan. The total length of the bridge is 920 meters, with the main tower reaching a height of 200 meters. The plan is to pour concrete for the main tower in 53 lifts, with the shape of the main tower changing complexly for each lift. PERI products are being used in the construction of this main tower. PERI products: 1. SCS Climbing System * Used for lifts 2 to 29 and 50 to 53. 2. ACS Self-Climbing System * Used for lifts 30 to 49. 3. PERI GT24 Girder * A formwork beam material with high load-bearing capacity and rigidity. 4. VARIO GT24 Wall Formwork * A truss beam wall formwork system using adjustable slots and joint fittings. 5. Custom formwork.

PERI products are used on construction sites around the world. This time, we would like to introduce the construction site of 'KingBridge Tower' in Bangkok, Thailand. This project is located at the intersection of the Phra Pinklao Bridge over the Chao Phraya River and Rama III Road in Bangkok, Thailand. It is a 52-story high-rise building with a total floor area of over 80,000 square meters, constructed by the local subsidiary of the major Japanese general contractor Obayashi Corporation (Thai Obayashi). PERI products were used in the construction of this massive high-rise building. PERI products: 1. VARIO GT24 Wall Formwork * Used in combination with a climbing system for the pouring of the lift core. 2. DUO System Formwork * Used for the pouring of various concrete walls. 3. RCS Rail Climbing System * Used for the construction of circular columns and lift cores. From PERI Thailand (Representative): PERI Thailand is proud to have contributed to the success of this project.

The "PERI GT 24 (formwork beam material)" has resolved the issue of material stability, which was the only drawback of wood, by constructing trusses using laminated timber. It maintains high precision without deformation over long periods and retains the advantages of wood, including the ability to be nailed. Additionally, the absence of warping, like that found in steel beams, improves the workability when using "PERI GT 24 (formwork beam material)" in the beam support areas. **For more details, please check related products. We also hold "product assembly experiences" and "system formwork study sessions" at our stockyard, so please feel free to contact us.** PERI Japan Co., Ltd.

Thank you very much for visiting the Perry Japan Co., Ltd. website regularly. We have recently renewed our company website. The overall design and layout of the site have been completely revamped, allowing you to view PERI products, services, and achievements more quickly. We will continue to focus on enhancing functionality and content so that everyone can make use of our website, and we appreciate your continued support. Perry Japan Co., Ltd.

PERI is launching a new plywood called "PERI Formply" that can be used for concrete pouring at construction sites, starting from November 2023. "PERI Formply" is a high-quality film-faced plywood developed for concrete formwork in the Australian market, modified to suit the Japanese market, achieving a balance between reusability and price. **For more details, please check the related products. We also offer "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

At Perry Japan, we have a stockyard and a product exhibition hall. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. Please be sure to check the related link for "[Product Exhibition Hall Tours and System Formwork Study Sessions] Perry Japan." Perry Japan Co., Ltd.

The "VARIO GT24" is a truss beam wall formwork system that uses adjustable slot fittings. By using it, it is possible to accurately assemble dimension panels tailored to each project. "VARIO means... versatility." **For more details, please check related products. We also hold 'product assembly experiences' and 'system formwork study sessions' at our stockyard, so please feel free to contact us.** Perry Japan Co., Ltd.

We are introducing reference cases where the lightweight resin formwork system "DUO" has been used on actual sites. **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"DUO" is a lightweight formwork system from PERI. It is made from a newly developed material called Politec, which is high-strength and lightweight. It has fewer components, making it easy to handle. The assembly method is straightforward, designed to require no tools, and allows for efficient work even for those with little experience in formwork. Most components share common specifications. 【DUO Product Features】 ■ A new system formwork made of resin ■ High strength and lightweight ■ Fewer components, easy to handle ■ 100% recyclable <NETIS Registration Number: KT-230004-A> https://www.netis.mlit.go.jp/netis/ **For more details, please check related products. We also offer "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

We are introducing reference cases where the aluminum slab formwork "GRIDFLEX" has been used on site. **For more details, please check the related products. Additionally, we also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"GRIDFLEX" is a standardized, highly flexible slab formwork that achieves improved labor productivity and high safety. With just two main components, it is possible to assemble the general part of the formwork. Furthermore, even if a change in assembly direction is required, there is no need to add additional materials. The panels are hooked from below and positioned by pushing them up with a shuttering aid. Once the assembly work from below is completed and the GRIDFLEX panels are laid out, safe access is provided to carry out the installation of the formwork plywood. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us.** Perry Japan Co., Ltd.

"TRIO" is a wall formwork system that can be used for various purposes at construction sites, enabling the simplification of formwork procedures and the reduction of construction time. It can be used for a wide range of applications, from residential and multi-story building construction to infrastructure projects, making it an economical system that enhances work efficiency. **For more details, please check the related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"PERI UP/Rosette" is an easy-lock (wedge-type) support system. Assembly is simple and safe, and it also improves work efficiency on site. It can be used for various applications, including work stages, table forms, stair towers, and more. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

Achieve safe and efficient work with PERI's system formwork! For concrete system formwork, the walls are 'DUO' (NETIS registered)! The slabs are 'GRIDFLEX'! **For more details, please check the related products. We also hold 'product assembly experiences' and 'study sessions on system formwork' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

"PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of a measuring device (main unit), sensors, and a web cloud service that handles the collected data. The sensors can connect temperature sensors, pressure sensors, filling sensors, and water-cement ratio sensors, allowing for customizable measurements in various stages of the concrete pouring process. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

Perry Japan Co., Ltd. introduces CNC machines to manufacture custom formwork. Perry's skilled formwork manufacturing team produces plywood panels cut to specified sizes and special formwork tailored to the requirements of each project. This includes custom-made work platforms, box outs, or 3D formwork units in various shapes and sizes. They are shipped fully prepared, allowing for immediate assembly upon delivery to the construction site. *For more details, please feel free to contact us. Perry Japan Co., Ltd.

The PERI climbing systems 'RCS', 'ACS', and 'CB' are utilized at various construction sites. The climbing systems, which are one of PERI's product groups, are used at construction sites around the world. This integrated climbing system combines working scaffolding and formwork systems to achieve 'improved formwork work efficiency', 'significant reduction in workforce', 'ensured accuracy in formwork construction', 'reduction of scaffolding materials', and 'ensured safety in the work area'. There are two types of climbing methods: one that uses a crane and another that uses a movable hydraulic device instead of a crane, allowing for the selection of the optimal method based on the specifics of the construction project. **For more details, please check the related products. We also hold 'product assembly experiences' and 'study sessions on system formwork' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.