"PERI Birch" is a formwork plywood (made from Nordic hardwood) that has obtained the internationally recognized forest certification PEFC, known for its high credibility, boasting "overwhelming reuse frequency" and "high thermal rigidity performance." Amid concerns over indiscriminate deforestation, there is a global demand for a series of processes for wood products based on sustainable forest management standards (production → transportation → processing → sales). "PERI Birch" achieves high efficiency due to its high reuse frequency while considering the global environment, leading to a reduction in total costs. We encourage you to consider using this product at construction sites or securing a substantial inventory. **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

PERI has started selling a new plywood called "PERI Formply" that can be used during concrete pouring at construction sites from November 2023. "PERI Formply" is a high-quality film-faced plywood developed for concrete formwork for the Australian market, modified to suit the Japanese market, achieving a balance between reusability and price. **For more details, please check the related products. We also hold "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

"PERI Magazine" introduces the products and achievements of PERI Japan Co., Ltd. We have included photos from sites where PERI products have been used, as well as customer interviews, so we hope you will download it. 【Contents (excerpt)】 ■ Greetings ■ Case studies of wind power generation facilities ■ Ishikari LNG Tank No. 4 construction ■ Tokyo Gas Co., Ltd. Hitachi LNG base No. 2 LNG tank construction (pages 8-9) ■ Niihama LNG base construction ■ Kyushu Shinkansen (Nishi-Kyushu), Omura vehicle base subgrade and other construction ■ Expansion construction of a certain logistics center ■ System formwork study session (Ibaraki stockyard exhibition building) **For more details, please check the related products. Additionally, we also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

"Multi Prop" is a lightweight aluminum support material. It can be used in combination with frames as a table system or shoring tower. It enables total cost reduction! **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. Perry Japan Co., Ltd.

"PERI Magazine" introduces the products and achievements of PERI Japan Co., Ltd. We have included photos from sites where PERI products have been used, as well as customer interviews, so we hope you will download it. [Contents (excerpt)] ■ Towards the Tokyo Olympics and Paralympics ■ Isezaki Ax Building (tentative name) new construction project ■ Toyama LNG Tank ■ Shin-Meishin Expressway Bokawa Third Bridge construction ■ Nakanoshima Festival Tower West new construction project **For more details, please check the related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

PERI's lightweight aluminum beam 'AB 20C' allows for nailing by inserting strip materials (plastic/plywood) at the top edge. It is weather-resistant, unaffected by pests, lightweight, and easy to recycle. The strip materials can be easily replaced for nailing. **For more details, please check related products. We also hold 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

The PERI Group publishes the "PERI BOOK," which summarizes company information, products and services, and achievements at overseas locations. Please take a look at the latest information from the PERI Group. **For more details, please check the related products. We also hold "Product Assembly Experiences" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

"DUO" is a lightweight formwork system from PERI. It is made from a newly developed material called Polytech, which is high-strength and lightweight. It has fewer components, making it easy to handle. The assembly method is straightforward, designed so that no tools are needed, and it allows for efficient work even for those with limited experience in formwork tasks. Most components share common specifications. 【DUO Product Features】 ■ A new system formwork made of resin ■ High strength and lightweight ■ Fewer components for easy handling ■ 100% recyclable <NETIS Registration Number: KT-230004-A> https://www.netis.mlit.go.jp/netis/ **For more details, you can check related products. We also hold "Product Assembly Experience" and "System Formwork Study Sessions" at our stockyard, so please feel free to contact us. PERI Japan Co., Ltd.

At Perry Japan, we have a stockyard and a product exhibition hall. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimo-Haji 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. Please be sure to check out '【Product Exhibition Hall Tour & System Formwork Study Session】Perry Japan' from the related links. Perry Japan Co., Ltd.

PERI has started selling a new plywood called "PERI Formply" that can be used during concrete pouring at construction sites from November 2023. "PERI Formply" is a high-quality film plywood developed for concrete formwork, which has been modified to suit the Japanese market while achieving a balance between reusability and price, originally designed for the Australian market. 【Product Features】 ■ Reusability Passed internal tests with 20 reuses. Cost efficiency and improved reusability are expected. (Note: The number of reuses may vary depending on the handling of the product.) ■ Quality Control Program Manufactured in strict compliance with specifications from PERI headquarters. Rigidity tests conducted by an official third-party organization. Tests conducted at a domestically JAS-certified factory. Obtained international forest certification. ■ Price Please feel free to contact us for inquiries. *For more details about this product, please do not hesitate to contact us. PERI Japan Co., Ltd.

On our company website, we introduce construction sites in Japan and other locations. Recently, from November 28 to December 1, 2023, we conducted a photo shoot at the construction site of the Danjiang Bridge in Tamsui District, New Taipei City, Taiwan. The main tower of this project will reach a height of 200 meters above the water surface. According to the plan, the main tower will be constructed in 53 floors, with each floor having a complex shape. As of now, the construction of up to the 17th floor has been completed. Please check our company website (Projects) for more details. ■ Project Name: "Danjiang Bridge Project" If completed, the Danjiang Bridge, designed by the late Zaha Hadid, will be the longest single-tower, asymmetrical cable-stayed bridge in the world. The construction of this RC main tower utilizes the Perry System (SCS+VARIO). Additionally, this project is an all-Perry project that was awarded with the support of the Perry Group's project and technical teams, with Perry Japan as the point of contact.

The year 2023 is coming to an end. In Germany, the short autumn has finished, and it is now time to prepare for Christmas. Perry Japan would like to extend our Christmas greetings to everyone. == We wish you and your family a Merry Christmas and a happy, healthy, successful, and above all peaceful New Year. Merry Christmas! We pray for the happiness and health of you and your family. And may you welcome a wonderful New Year. == Perry Japan Co., Ltd.

Happy New Year! We would like to express our heartfelt gratitude for your support throughout the past year. This year, we will continue to strive for further improvements in product quality and service in all situations, including concrete pouring at construction sites. We kindly ask for your continued support and patronage. We wish you all good health and happiness, and we would like to take this opportunity to extend our New Year greetings. We look forward to your continued support this year as well. Perry Japan Co., Ltd.

Thank you for your continued support. We would like to inform you about our year-end and New Year holiday schedule as follows: <Year-End and New Year Holiday Period> From Friday, December 29, 2023, to Wednesday, January 3, 2024. Inquiries during the holiday period will be addressed sequentially starting from Thursday, January 4, 2024. Perry Japan Co., Ltd.

September 7 (Thursday) to 8 (Friday), held in Kobe! We will be exhibiting at the International Frontier Industry Messe 2023! The International Frontier Industry Messe 2023 is one of the largest comprehensive industrial exhibitions in western Japan, scheduled to be held over two days. In 2022, approximately 13,000 people attended. In 2023, products that serve as a foundation for introducing advanced technologies and creating new businesses will be showcased by 441 exhibiting companies and organizations, primarily from the Kansai area. PERI Japan will once again exhibit alongside other German companies as a member of the German business community in Japan. We will introduce our digital solution, 'PERI ISC,' which optimizes the concrete pouring process at construction sites, contributing to time savings and cost reductions. 'PERI ISC' (PERI InSite Construction) is a concrete sensor product that optimizes the concrete pouring process at construction sites, helping to save time and reduce costs. We invite you to visit the German Pavilion and our exhibition booth. Thank you very much. PERI Japan Co., Ltd.

The PERI Group publishes the "PERI BOOK," which summarizes company information, products and services, and achievements at overseas locations. PERI was founded in 1969 by Mr. Artur Schwörer in the town of Weißenhorn in southern Germany. Since then, we have provided our customers with innovative system formwork and scaffolding in formwork construction, as well as efficient construction know-how backed by experience. Born from a single engineer, PERI now has subsidiaries in over 61 countries and supports customers worldwide through 110 logistics locations. Please take a look at our product lineup and achievements overseas. PERI Japan Co., Ltd.

PERI will launch a new plywood called "PERI Formply" that can be used during concrete pouring at construction sites. "PERI Formply" is a high-quality film plywood developed for the Australian market, modified to suit the Japanese market, achieving a balance between reusability and cost. 【Product Features】 ■ Reusability Passed internal tests with 20 reuses. Cost efficiency and improved reusability are expected. (Note: The number of reuses may vary depending on the handling of the product.) ■ Quality Control Program Manufactured in strict compliance with specifications from PERI headquarters. Rigidity tests conducted by an official third-party organization. Tests conducted at a JAS certified factory in Japan. Obtained international forest certification. *For more details about this product, please feel free to contact us. PERI Japan Co., Ltd.

We are pleased to announce that PERI Japan Co., Ltd. will launch a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reductions. The "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of a measuring device (main unit), sensors, and a web cloud service that handles the collected data. The sensors can connect temperature sensors, pressure sensors, filling sensors, and water-cement ratio sensors, allowing for customizable measurements in various scenarios of the concrete pouring process. Please take a look at the new product, the construction concrete sensor "PERI ISC," through the related link. PERI Japan Co., Ltd.

On our company website, we introduce construction sites in Japan and other locations. On August 22, 2023, we conducted a photo shoot at the construction site of the Danjiang Bridge in the Tamsui District of New Taipei City, Republic of China (Taiwan). The main tower of this project will reach a height of 200 meters above the water surface. According to the plan, the main tower will be constructed in 53 floors, with each floor having a complex shape. As of now, the construction of up to the 10th floor has been completed. Please check our company website (Projects) for more information. ■ Project Name: "Danjiang Bridge" If completed, the Danjiang Bridge, designed by the late Zaha Hadid, will be the longest single-tower, asymmetrical cable-stayed bridge in the world in terms of span length. The construction of this RC main tower utilizes the Perry System (SCS+VARIO). Additionally, this project was secured with the support of the Perry Group's project and technical teams, with Perry Japan as the point of contact, making it an all-Perry project.

September 1-2, held in Kobe! We will be exhibiting at the International Frontier Industry Messe 2022! The International Frontier Industry Messe 2022 is one of the largest comprehensive industrial exhibitions in western Japan, expected to attract around 10,000 visitors over two days. Exhibits will include advanced technologies from companies, universities, and research institutions primarily in the Kansai area, as well as products that serve as a foundation for new business creation. This time, Perry Japan will be exhibiting in the German Pavilion as a member of the German companies in Japan. Six companies showcasing German products used in manufacturing, construction, and transportation will be participating. We invite you to visit the German Pavilion and our exhibition booth. Thank you very much for your support. (International Frontier Industry Messe 2022 Perry Japan introduction page) https://www.kobemesse.com/exhibit/13170

The lightweight resin formwork system 'DUO' from PERI has been registered with NETIS (New Technology Information System). <NETIS Registration Number: KT-230004-A> https://www.netis.mlit.go.jp/netis/ 'DUO' is a lightweight formwork system from PERI. It is made from a newly developed material called Polytech, which is high-strength and lightweight. It has fewer components, making it easy to handle. The assembly method is straightforward, designed to eliminate the need for tools, and allows for efficient work even for those with little experience in formwork tasks. Most components share common specifications. **For more details, please check the related products. We also offer 'Product Assembly Experience' and 'System Formwork Study Sessions' at our stockyard, so feel free to contact us. PERI Japan Co., Ltd.

Thank you for your continued support. We would like to inform you of our summer holiday schedule as follows: <Summer Holiday Period> From Friday, August 11, 2023, to Tuesday, August 15, 2023. Inquiries during the holiday period will be addressed sequentially starting from Wednesday, August 16, 2023. Perry Japan Co., Ltd.

The lightweight aluminum beam "AB 20C" from PERI allows for nailing by inserting strip materials (plastic/plywood) into the top edge. It is weather-resistant, unaffected by pests, lightweight, and easy to recycle. The strip materials can be easily replaced for nailing. We offer a wide range of components for fixing between these products, as well as for securing the aluminum beam "AB 20C" with steel wales, including the "Universal Clamp Aluminum Beam" and hook straps like "HB VT-AB." 【Features】 ■ Weather-resistant ■ Unaffected by pests ■ Lightweight ■ High residual value ■ Efficient transportation and storage *Company brochures and product materials are available for download. *Please feel free to contact us for more details about this product.

On our company website, we introduce construction sites in Japan and other locations. We have added progress photos (as of June) to the project page for the construction taking place in Tamsui District, New Taipei City, Republic of China (Taiwan). The main tower of this project will reach a height of 200 meters above the water surface. According to the plan, the main tower will be constructed in 53 floors, with each floor featuring a complex variation in shape. As of now, the pouring has been completed up to the 8th floor. Please check our company website (Projects) for more details. ■ Project Name: "Danjiang Bridge Project" If completed, the Danjiang Bridge, designed by the late Zaha Hadid, will be the longest single-tower, asymmetrical cable-stayed bridge in the world, with the longest span. The Perry System (SCS+VARIO) is being used for the construction of this reinforced concrete main tower. Additionally, this project is an all-Perry project that was awarded with the support of the Perry Group's project and technical teams, with Perry Japan as the point of contact.

On our company website, we introduce construction sites in Japan and other locations. We have added a page for a project currently under construction in Tamsui District, New Taipei City, Republic of China (Taiwan). Project Name: "Danjiang Bridge Project" The "Danjiang Bridge," designed by the late Zaha Hadid, will be the longest single-tower, asymmetrical cable-stayed bridge in the world upon completion. The construction of this reinforced concrete main tower utilizes the Perry System (SCS+VARIO). Additionally, this project is an all-Perry project that was awarded with the support of the Perry Group's project and technical teams, with Perry Japan as the point of contact. We will periodically showcase construction photos on our website. Please check our company website (Projects) for updates.

PERI will launch a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reductions. We have recently updated our website by adding a product page for PERI ISC (PERI InSite Construction). Please check it out on our website (PERI Japan Co., Ltd.) via the [related link]. You can also view details about the new construction concrete sensor 'PERI ISC' through the [related products] link. Thank you very much.

The lightweight aluminum beam "AB 20C" from PERI allows for nailing by inserting strip materials (plastic/plywood) into the top edge. It is weather-resistant, unaffected by pests, lightweight, and easy to recycle. The strip materials can be easily replaced for nailing. We offer a wide range of components for fixing between these products, as well as for securing the aluminum beam "AB 20C" with steel wales, including the fixing component "Universal Clamp Aluminum Beam" and hook straps "HB VT-AB." 【Features】 ■ Weather-resistant ■ Unaffected by pests ■ Lightweight ■ High residual value ■ Efficient transportation and storage *Company brochures and product materials are available for download. *Please feel free to contact us for more details about this product.

The ACS technology introduction article will be published in the February 2023 issue of "Bridges and Foundations"! "Bridges and Foundations" is a specialized magazine on bridge technology published by Kenchizu-sha Co., Ltd. In the February 2023 issue, an article introducing our company's Perry climbing system, ACS technology, will be featured in the section on "Foundation and Substructure Related Technologies for Bridges"! **The February 2023 issue of "Bridges and Foundations" will be released on February 6, 2023. The ACS (Automatic Climbing System) is a hydraulic climbing system that prioritizes safety. ■ Information about the product (ACS) can be downloaded from Ipros. ■ Please feel free to contact us for more details about this product. ■ For the February 2023 issue of "Bridges and Foundations" and back issues, please refer to the related links for Kenchizu-sha Co., Ltd. and Shinano Book.com.↓↓

From October 24 to 30, bauma 2022 was held in Munich, Germany (at the Munich International Conference Center). Bauma is the world's largest international trade fair for construction machinery, building materials manufacturing machinery, construction vehicles, and related industries, held every three years. This time, approximately 3,200 companies from 60 countries exhibited, and more than 495,000 visitors from over 200 countries attended. PERI showcased its products (construction formwork and shoring products, construction 3D printers, etc.) in an exhibition space of about 4,000 square meters. During the seven-day event, we welcomed over 200,000 visitors. The next bauma is scheduled to be held from April 7 to 13, 2025. **You can check our company information, our videos, and bauma videos through the related links, so please take a look.**

We have published the 4th issue of Perry Magazine! Perry Magazine is an irregularly published external report by Perry Japan Co., Ltd. It includes case studies gathered from customer feedback, information about products, and details about events at the stockyard. Please download it and take a look. <Contents> ■ Greetings ■ Case Study of Wind Power Generation Facilities ■ Ishikari LNG Tank No. 4 Construction ■ Tokyo Gas Co., Ltd. Hitachi LNG Base No. 2 LNG Tank Construction (Pages 8-9) ■ Niihama LNG Base Construction ■ Kyushu Shinkansen (Nishi-Kyushu), Omura Vehicle Base Foundation and Other Works ■ Expansion Work at a Certain Logistics Center ■ System Formwork Study Session (Ibaraki Stockyard Exhibition Building)